Skid-mounted equipment and standardized design have been applied in quite a few countries abroad in the 1960 s and 1970 s, especially in the United States, Britain, Japan and other countries. This technology has brought high economic and social benefits to many engineering construction industries. Almost all of the various devices and equipment they use are pre-prepared picking equipment sets. Let's learn about the characteristics of skid-mounted equipment!

Skid-mounted equipment refers to a series of equipment fixed on the chassis made of mountain-shaped steel or h-shaped steel. Sled rods can be used for mobile positioning. It is a form of equipment frame and equipment overall combination. In addition, it is an integrated collection of installed valves, pumps and other equipment. When connected to other equipment on the system, there is no need to install valves, instruments and other equipment in the middle, and only piping can be connected. The installation is convenient, the movement is convenient, the production and assembly of the picking equipment are completed in the factory, the on-site installation workload is small, and the connection between the interface pipeline and the external electrical can be completed; the equipment is compact, and the installation area is smaller than the traditional installation method.

　　The advantages of "modularization, picking and factory"

1.1 three-dimensional modeling During the implementation of the project, the engineer realized the visual design and construction of the device through three-dimensional modeling of engineering equipment, process pipes and steel structures, so that the design, construction and operation personnel can grasp the process flow, spatial flow and module spatial arrangement of process pipes at a glance, which is convenient for designers to carry out design self-inspection and meeting signature inspection among various disciplines, and effectively avoids the occurrence of conflicts, greatly speed up the meeting and approval of design drawings, improve the quality of design

By using the standardized picking design of drawings, the 1.2 greatly shortens the design cycle of the device, improves the design quality of the device, and effectively realizes the refinement and standardization of the design. In addition, during the continuous development of project design, the design and optimization of many standard typical drawings were completed. These drawings can also be reused in other projects. This significantly reduces the design workload, greatly shortens the design cycle of the project, the picking module is reused many times, and the equipment reuse rate reaches 90

1.3 the picking of maintenance devices becomes easy, it is conducive to the bulk purchase of materials and equipment. With the standardization of design, the project equipment, piping, instrumentation, electrical, equipment foundation, etc. are finalized, and the batch procurement of equipment and materials can effectively save costs and shorten the procurement cycle. Modularization makes the equipment and parts universal and interchangeable, which is convenient for on-site construction and installation. In the past, for fixed equipment installed on site, the supplier was usually not one, so the subsequent operation and maintenance costs and management were difficult. The failure of the picking device can be solved by the supplier in time, which improves the stability and reliability of the device operation, and also facilitates the maintenance and management of the equipment. 1.4 the "standardized and modular" design that greatly shortens the on-site construction time, the process standardization is realized. The process module realizes slider and factory manufacturing. The production and assembly of the picking equipment are completed in the factory, and the on-site installation workload is small. The interface pipeline and the external functional components are integrated on a whole basis, and the overall movement is convenient, To a certain extent, the technical problems of the construction site are solved.

1.5 skid-mounted equipment to improve engineering quality Standardized design can avoid the probability of design errors and greatly reduce the situation of on-site construction rework; standardized design makes equipment, pipelines, instruments, electrical, etc. finalized, and suppliers and construction units are familiar with the requirements for the device, which is conducive to improving the processing and manufacturing quality of the device and the installation level of on-site construction; mature technology and advanced equipment pre-manufactured in the factory, the "standardized and modular" design, which is easy to ensure the quality of the project, helps to improve the overall quality level of the project construction.

The picking design of 1.6 skid-mounted equipment to improve construction efficiency is helpful to improve the construction environment and improve construction efficiency. The "factory" design of the process unit reduces the restrictions on product quality and construction progress from bad weather, and greatly reduces the on-site construction workload. Especially in view of some relatively poor natural conditions, make full use of the picking design, complete most of the installation and commissioning of the equipment in the factory of the production device, which helps to reduce the outdoor labor intensity of workers, realize standardized construction management, and greatly improve construction efficiency.

The above is the characteristics of skid-mounted equipment, if you need to know more, please feel free to contact us!